NEW: $13.95US for Kit F1: 15mm 1930’s Building Facade.

This detailed, single piece building facade is cast in high strength Ultracal 30 plaster/cement blend. Measuring by 14.5cm tall x 9.5cm (or 5 7/10″ x 3 7/10″), it is designed to represent the fronting on a 1930’s style two story building, with a ground floor cafe or store front. Please click images above for larger versions.

It can be used to represent an intact building, and because it’s cast in cement can be drilled, sanded and cracked to make a war torn ruin. Doors, windows and the floor level spacing have all been created with 15mm Flames of War based figures in consideration.

This kit contains:

• 1 detailed building facade.

$14.50US for Kit T: 15mm Guard tower.

This eight part resin kit builds into a 15mm guard tower with a removable roof. The finished tower is large enough to comfortably hold a Flames of War small Infantry base.

This kit contains:

• 3 sandbagged resin tower sides.
• 1 sandbagged resin open tower side.
• 1 textured resin tower roof and resin beam to angle roof.
• 1 textured resin tower floor.
• 1 resin ladder.

$7US for Kit O: 15mm Forward OP.

This five part resin kit builds into a 15mm forward observation post that’s designed to drop into our trenches - Kits A and B below. The finished OP is large enough to hold a Flames of War small Infantry observer base.

This kit contains:

• 1 detailed sandbagged resin corrugated iron roof.
• 2 textured long resin support walls.
• 2 textured short resin support walls.

$17.50US for Kit A: 15mm trench + angle combo.

This combines the Kit B: 15mm straight trench AND Kit C: 15mm angle kits and provides enough modular pieces to create:

• Twenty cms of two-sided trench with a central 45 degree bend (as shown in photo),
• or forty cms of one-sided breastwork with two 45 degree bends (one concave and one convex) with additional pieces to build a free-standing gun emplacement.
• Any length of ‘zig zag’ two sided trench with multiple copies of this kit.

Plans are included with kit and available online. This kit contains:

• 4 x long (88mm) linear pieces.
• 4 x 90 degree joiners.
• 2 x left end piece.
• 2 x right end piece.
• 2 x small (17mm) linear pieces.
• 1 x medium (34mm) linear piece.
• 1 x 45 degree convex joiner.
• 1 x 45 degree concave joiner.

$12.50US for Kit B: 15mm straight trench.

This kit provides enough modular pieces to create:

• Twenty cm of straight two-sided trench (as shown in photo),
• or forty cm of straight one-sided breastwork.

Plans are included with kit and available online. This kit contains:

• 4 x long (88mm) linear pieces.
• 4 x 90 degree joiners.
• 1 x left end piece.
• 1 x right end piece.

$7.50US for Kit C: 15mm angles.

This kit provides enough modular pieces to:

• add a 45 degree bend to a single Kit B: 15mm straight trench,
• or join two Kit B: 15mm straight trenches,
• or to create a single large gun emplacement.

This kit contains:

• 2 x small linear pieces.
• 1 x medium linear piece.
• 1 x left end piece.
• 1 x right end piece.
• 1 x 45 degree convex joiner.
• 1 x 45 degree concave joiner.

$9US for Kit D: 15mm emplacements.

This kit provides enough modular pieces to create two large gun emplacements as shown in photo.

This kit contains:

• 4 x 45 degree concave joiner.
• 2 x left end piece.
• 2 x right end piece.

Order individual pieces

You can also order individual pieces to make your own kits, or extend any of our kits above. Individual piece prices are:

$1.50US for the long linear piece.
$1.10US for any other piece.

Postage for individual pieces is the same as our kits. Please contact me via email for individual piece orders. The pieces available are:

	Long linear piece.
	Medium linear piece.
	Small linear piece.
	Left end piece.
	Right end piece.
	90 degree joiner.
	45 degree concave joiner.
	45 degree convex joiner.

Product Information

All pieces in these modular kits are carefully cast in Ultracal 30 which is a super-strength gypsum cement that won’t chip or crumble. Resin parts are cast in a high quality two part rigid urethane resin. This is quality terrain that is built to last years of gaming.

Ultracal 30 paints well with all hobbyist enamel and acrylic paints. We recommend you wash and prime our resin parts with a modeller’s primer before painting.

These kits are intended for experienced hobbyist as sanding and pinning may be required for the best result.

All pieces are sold unpainted and all figures shown in photos are for demonstration purposes only and are not included in kits.

Ordering Kits

We welcome orders from around the world and accept payment via PayPal. All our prices are listed in US$.

Our shipping charge is a flat 20% of the value of kits ordered.

All orders are shipped ‘all care, no responsibility’. This means I’ll pack your order as carefully as possible but will accept no responsibility for loss, pilferage or damage that may occur during shipping.

All orders are shipped as soon as payment has been received. I’ll contact you via email once your order has been placed. Please allow 24 hours for me to respond. All addresses are used for ordering only and are not saved once order is completed.

Email any queries to tabletop_terrain@fastmail.fm